Why is sheetrock so popular since it is fragile, weak, and crumbles quickly? There are several good arguments for using sheetrock (also known as drywall) in today’s homes. Sheetrock is inexpensive, highly malleable, fireproof, and a fantastic starting point for a wallpapered wall. So, while it’s not the sturdiest material, it benefits more than makeup.
Simply put, Sheetrock is nothing more than gypsum plaster that has been “wrapped” in heavy paper. The paper’s tensile strength prevents the otherwise brittle board from breaking. Therefore, you can “crack” the board along this line by merely cutting the article on one side of the board and then flipping it over to cut the other side. Sheetrock boards can be trimmed in this fashion to fit almost any design requirement.
Drywall screws of the proper length (or nails, but screws are preferred) are used to secure sheetrock to wall studs. For sheetrock that is 12 millimeters or less in thickness, use drywall screws measuring 25 millimeters in length, and for sheetrock measuring 15 millimeters in thickness, use drywall screws measuring 32 millimeters in length.
Thanks to modern pneumatic equipment and air compressors, we can securely use air-powered screw guns to attach sheetrock boards to walls and ceilings. These function similarly to a nail gun, allowing the drywaller to fasten boards to the top without a prop and at a far faster rate than is possible without a screw gun.
You can use a circular saw with a suction attachment or cut the sheetrock the way I described above with just a utility knife. Of course, it’s not impossible to cut out sheetrock using patterns other than those I outlined above, but these are the methods most commonly used by professionals. Since I have described the utility knife approach, let me move on to the circular saw approach.
Sheetrock is often cut with a circular saw with a 6-1/2-inch blade because this size does not require as much power or depth. Sheetrock is relatively soft, easy to cut, and maybe sliced through quickly with even a tiny circular saw. In contrast to conventional circular saws, these models feature a dust output that may be connected to a vacuum hose.
The vacuum cleaner is used to power the circular saw and should have on/off/auto power settings. When you press the “on” button, the vacuum will run whether or not the saw is turned on. Turning it to “auto” synchronizes it to turn on and off simultaneously as the circular saw, and “off” turns it off completely. When coupled to the circular saw, the preferred mode is automatic.
The circular saw, vacuum hose, and vacuum cleaner should be purchased together as a set, or an expert should be consulted to ensure proper compatibility. Cutting sheetrock with a circular saw that doesn’t have a vacuum attachment generates a lot of dust, some of which is hazardous.
If you’re considering living without a vacuum attachment, I have some advice: don’t! – Because of the nature of sheetrock as an interior building material, this is especially true when working in confined spaces like a room during a renovation. In addition, it will spread a thick layer of white powder all over the space you are in, necessitating additional cleaning.
Tips, Tricks, and Pointers for Finishing the Sheetrock
Ensure you have an excellent putty joint by chamfering the edges of all drywall boards touching one another. Before wallpapering, all seams will be puttied, but putty in narrow spaces will dry, break, and crumble. So, chamfering ensures enough putty is used to make joints that last. You only need a utility knife or hand planer with a V groove on the bottom to chamfer.
Check the sheetrock for protruding screws or nails and remove them. This is vitally crucial since any screws left in the wall after the wallpaper has been hung would not only be seen as a lump through the wallpaper but could also damage it. However, if you sink them too deeply, they won’t be able to support the drywall either. The screw head should be sunk slightly past the surface of the sheetrock without totally punching through the paper. This is crucial while working on ceilings. Ceiling boards cannot be relied on to remain in place if the screws used to install them are sunk too deeply.
Sheetrock boards can be piled in orderly stacks and afterward sliced vertically. Adjust the blade depth to slightly less than the board thickness to avoid accidentally slicing through to the boards below. The last step is cutting the excess paper with a utility knife. You can also cut the form on the “outside” of the saw-blade kerf by turning the boards over for a reverse cut. With the paper covering the gaps, you can cut the board slightly smaller than necessary (to facilitate assembly) without anyone noticing.
If you need to make a lot of tiny cuts or complicated angles, a hand saw will be helpful.
When walls aren’t perfectly vertical, you can use a rasp to smooth the bumps. For minor modifications, this method is both efficient and time-saving.
Go to Free and Handy if you enjoyed this article.
