Error 0x80080008 After Windows 10 1709 Update – How to Completely Install Windows 10 Version 1709 Without Any Problems
Microsoft launched the “Fall Creators’ Update” in October 2017, the equivalent of a “Service Pack.” The PC community received it as essential upgrades to the underlying Windows 10 OS.
The new “1709” operating system adds some essential features, but many users felt upgrading to it was difficult. Thus, they haven’t been able to reap the benefits.
Incompatible hardware was the most common cause of upgrade failure. In general, systems using hardware eight or older were hesitant to install the update. The fact that most plans did not explain *how* or *why* the installation had failed only made matters worse.
This guide investigates the most typical triggers for this issue and potential solutions…
Problems with the 1709 “Creators Update”
The most common cause is outdated hardware, which prevents Windows from installing necessary files and functionality to get the operating system up and running. Additional issues include…
Discordant hardware/software combinations
Corrupted Windows configurations or data
Incompatible antivirus software prevents setup
Inadequate Windows functionality caused by out-of-date files
In most cases where the update fails to install, your computer will begin to “download” and “install” it in the background as you do your business.
After a few files have been uploaded to your system, you’ll be prompted to restart; after doing so, a screen will emerge displaying the “progress” of the installation, complete with a percentage update and pinpointing where the update stands in the installation process.
If the growth rate exceeds 30%, the system will restart and display the (“configuring”) screen again. This happens again at roughly 33%. Whenever an installation fails, the “Restoring To A Previous Version of Windows” screen will appear after the computer restarts.
The update does not specify the root cause, which is likely why many users have encountered issues. What follows should help you resolve any problems that may exist within your system and allow the upgrade to continue:
How to Repair Error 0x80080008 After Installing Windows 1709
The error’s vagueness necessitates thoroughly investigating various potential causes and solutions.
Those who have worked on Windows or PCs know that each is a standard procedure. They cover a lot of ground but fix the core issues that cause Windows 10 to reject the update in most cases.
Invoke SFC and DISM 1.
“System File Checker” is abbreviated as “SFC.”
“Deployment Imaging Servicing Management” = “DISM”
Both of these are Command Prompt (CMD) utilities that can be used to repair essential Windows components. Their primary application is fixing Windows Update-related issues (like this one) by “flushing” the system of any corrupted or damaged data.
Using these two built-in utilities is the first step in fixing any fundamental issues with Windows. The following tools can help you accomplish your goal:
Enter “Windows” + “S” on your keyboard.
Simply typing “CMD” into the “Search” box that appears will do the trick.
Select “Run As Administrator” from the context menu after right-clicking the “Command Prompt” icon.
In the new window that has opened, type:
scannow / sfc
Dism /Online /Cleanup-Image /Restorehealth
Each one must end before you can move on to the next. Once you’ve finished those two things, you can move on to the next phase…
Turn off Automatic Updates in Windows
The Windows Update services, which are always active in Windows 10, should be stopped next. While these aren’t malicious in and of themselves, they can cause issues with the Windows 1709 upgrade that must be addressed in the ways described below.
Type “Windows” + “S” to open a text editor
Enter “CMD” and right-click one of the results to access the menus.
Activate the “Run As Administrator” option.
When it begins loading, enter these instructions:
Away with Wuauserv on the net
halt bits net
net halt doc
3. Remove the “SoftwareDistribution” directory
Next, remove the “SoftwareDistribution” folder from C:/Windows. Windows stores update that has not yet been installed in this area (updates are downloaded from Microsoft’s servers and installed from the SoftwareDistribution folder during installation).
The files in this folder are particularly vulnerable to corruption and destruction, which can cause Windows to act abnormally or even prevent the installer from running. Therefore, deleting the entire folder will also delete any possibly corrupted files.
You can only accomplish this if you can disable the various update services (2). If this works (which it doesn’t always), your computer will need to re-download the updates, but they will be brand new this time.
Access “FileExplorer” by selecting it from the “Start” menu’s left “Charms” submenu.
Open the C:/Windows folder.
Just click the “SoftwareDistribution” button.
To delete, use SHIFT + DELETE.
Put it to rest
Reboot your computer.
After a system reboot, the update must be redownloaded manually. The following action will show you how to accomplish this…
Help with Windows 10 Updates
The “Update Assistant” feature in Windows 10 is the next step, allowing you to download the required update manually.
Here’s how to accomplish that:
Type “Windows 10 Download” into Google and hit enter.
To initiate an update, use the “Update Now” tab at the top of the page.
By clicking this, you can get the “Update Assistant” for your computer.
The updated files for manual installation will be downloaded at this time.
Allow the update to be installed.
In most cases, this procedure will fail once again. If it doesn’t, then you’ve successfully updated to version 1709. If the installation fails, check for any other problems that might have stopped the system from putting it in place correctly.
5. Disconnect Any Extraneous Equipment
If the update still doesn’t function, disconnect any external devices (such as printers connected via USB) from your computer.
While this may sound harsh initially, remember that most users still operate with relatively antiquated “external” hardware that may not have up-to-date drivers.
Therefore, uninstalling these devices is one of the most significant ways to guarantee that the 1709 update can install.
This can be achieved by following these steps:
Disconnect your actual computer from any peripherals connected via USB, SCSI, or Firewire.
Go into “Device Manager” and “Uninstall” the drivers for each device you just took off the system.
Turn off the machine and continue.
Finally, it would be best if you considered taking the extra step of disabling or removing your antivirus program.
This may seem risky, but it’s not that serious as long as you avoid downloading harmful software from the web.
It’s crucial since it allows you to update your system’s settings and install new files without first having to scan for viruses. Several people have speculated that anti-virus software prevents the 1709 update from being implemented.
Right-clicking the “Start” button (Windows 10’s bottom left) and choosing “Apps and Features” should resolve the issue. Navigate to the bottom of the page to remove the antivirus software. You shouldn’t need more than five minutes for this.
You can then restart the “Update Assistant” and see if it helps.
If it works, you must add whatever components you took from the system. If not, then you have a more severe issue with your computer that can only be fixed by conducting more targeted diagnostics.
You may consider contacting a technical support agency if you can’t discover a reliable “PC Repair” tool.
Read also: Instructions For Putting In A New Pool Liner.